Curtiss-Wright Controls CBL-182-FPL-000 Connects to Front panel in all pin-out modes Two-part front panel cable set for SVME-182/183. One cable provides two 9-pin D connectors for RS-232 ports and a push-button switch for card reset; second cable provides standard RJ-45 10/100Base-T Ethernet jack and one USB type A receptacle.
Curtiss-Wright Controls CBL-182-P0-000 Connects to P0 in all pin-out modes P0 break-out cable for 182/183 in all pin-out modes. Provides RJ-45 Jack for 10/100/1000Base-T Ethernet interface, 25-pin female D connector for TTL discretes, USB type A receptable for USB port 2, and PMC I/O on 78-way connector. Also includes reset switch.
Curtiss-Wright Controls CBL-182-P2-010 Connects to P2 in pin-out Mode #10 P2 break-out for 182/183 in Mode 10. Provides separate branches and connectors for two RS-232 ports, two RS-232/422/485 ports, GbE, and PMC I/O on 78-way connector.
Curtiss-Wright Controls CBL-183-JTAG Connects to 183 test connector Connects to 183 test connector and provides standard 2x8.1î pitch header for JTAG/COP emulators
Curtiss-Wright Controls CBL-183-P2-000 Connects to P2 in pin-out Mode #0 (no IPM) P2 break-out cable for 182/183 in pin-out Mode 0. Provides separate branches and connectors for two 9-pin D connectors for RS-232 ports, RJ45 jack for Ethernet, and 18x-standard 78-way connector for PMC I/O.
Curtiss-Wright Controls CBL-183-P2-006 Connects to P2 in pin-out Mode #6 P2 breakout connector for 181/182/183 in pin-out mode 6. Provides two 9-pin D connectors for RS-232 ports, four 25-pin D connectors for RS-422/485 ports, RJ45 jack for Ethernet, and 18x-standard 78-way connector for PMC I/O.
Curtiss-Wright Controls CBL-183-P2-009 Connects to P2 in pin-out Mode #8 and #9 P2 break-out for 182/183 in Mode 8 (single MIL-STD-1553) and Mode 9 (dual MIL-STD-1553). Provides separate branches and connectors for the transformer-coupled MIL-STD-1553 signals, MIL-STD-1553 configuration inputs, two RS-232 ports, two RS-232/422/485 ports, RJ-45 jack for Ethernet, and PMC I/O on 18x-standard 78-way connector. Connectors for MIL-STD-1553 signals are 3-lug Twinax bulkhead jack connectors, Trompeter part number BJ79-47.
Curtiss-Wright Controls CBL-183-P2-011 Connects to P2 in pin-out Mode #11 P2 break-out cable for 183 in Mode 11. Provides separate branches and connectors for one MIL-STD-1553 channel, MIL-STD-1553 configuration inputs, two RS-232 ports, two RS-232/422/485 ports, GbE, 2 SATA ports, and PMC I/O on 78-way connector. Connectors for ’MIL-STD-1553 signals are 3-lug Twinax bulkhead jack connectors, Trompeter part number BJ79-47.
Curtiss-Wright Controls CBL-183-P2-012 Connects to P2 in pin-out Mode #12 P2 break-out cable for 183 in Mode 12. Provides separate branches and connectors for two RS-232 ports, two RS-232/422/485 ports, GbE, 2 SATA ports, and PMC I/O on 78-way connector.
Curtiss-Wright Controls CBL-183-P2-2310 Connects to P2 in pin-out Mode #10 and with StarLink PMC P2 breakout cable for 182/183 in pin-out Mode 10 with PMC-230/233 StarLink module. Separate branches and connectors for 2 EIA-232 ports, 2 EIA-422/485 ports, 1GbE branch terminating in an RJ-45 bulkhead-mount jacks, and 8 branches with StarFabric connections (4 x Tx, 4 x Rx) terminating in RJ-45 bulkhead-mount jacks. All branches a minimum length of 18”.
Curtiss-Wright Controls CBL-183-P2-236 Connects to P2 in pin-out Mode #6 and with StarLink PMC P2 breakout cable for 182/183 in pin-out Mode 6 with PMC-230/233 StarLink module. Separate branches and connectors for 2 EIA-232 ports, 4 EIA-422/485 ports, one 10/100MB/s Ethernet branch terminating in an RJ-45 bulkhead-mount plug, and 8 branches with StarFabric connections (4 x Tx, 4 x Rx) terminating in RJ-45 bulkhead-mount plugs. All branches a minimum length of 18”.
Curtiss-Wright Controls CBL-SBC-P2-000 Connects to P2 in pin-out Mode #1 P2 break-out cable for 179/181/182/183 in pin-out Mode 1 with separate branches and connectors for 8-bit SCSI interface (using 68-way 16-bit SCSI connector), 2 EIA-232 ports, EIA-422/485 ports 3 and 4, and PMC I/O on 78-way connector. (Note - no Ethernet branch.)
Curtiss-Wright Controls CBL-SBC-P2-002 Connects to P2 in pin-out Mode #4 P2 break-out cable for 179/181/182/183 in pin-out mode 4 with separate branches and connectors for 16-bit SCSI interface (using 68-way 16-bit SCSI connector), 2 EIA-232 ports, EIA-422/485 port 3, and PMC I/O on 78-way connector. (Note - no Ethernet branch.)